(1) when the glass arrives at the measuring device, stop conveying.
(2) measure the total width of W, and according to manual input
G1 and G2 values were calculated for gel width.
W-g1-g2=b
(3) after measuring, the glass stops at the suction cup
The suction cup is fully absorbed, and the suction cup is synchronized with the conveyer belt
Glue delivery.
(4) when the glass tail reaches the gun head, stop transmitting,
After positioning, the lifting mechanism begins to rise
Glue on the first side.
(5) turn the gun head to the bottom, turn 90 degrees, place and angle glue. The glass is transported forward, gluing the base (four sides) and moving at the measured length. Make fourth Jiao injection. Finish gluing.